Sewing the Patio Chair Covers: How To Sew Patio Chair Covers
Now that you have your fabric cut and ready, it’s time to sew those covers! This section will guide you through the process of stitching together the different parts of your patio chair cover, offering tips and tricks to ensure a professional finish.
Sewing the Seat Cover
The seat cover is the most basic part of the patio chair cover. Here’s how to sew it:
1. Pin and Stitch the Sides: Lay the fabric for the seat cover right side up. Pin the two shorter sides together, matching the raw edges. Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
2. Sew the Back Seam: Fold the fabric in half lengthwise, right sides together. Pin the raw edges of the back seam together. Stitch along the pinned line, leaving a 1/2 inch seam allowance.
3. Finishing the Edges: Turn the seat cover right side out. Fold the raw edges of the opening (where you didn’t sew) under by 1/4 inch and then again by 1/4 inch. Press the folded edges flat. Stitch along the folded edge with a straight stitch to create a clean, finished edge.
Tip: For a more durable finish, you can use a serger to finish the raw edges of the seat cover.
Sewing the Backrest Cover, How to sew patio chair covers
The backrest cover is similar to the seat cover, but it may have a slightly different shape depending on your chair. Here’s a general guide:
1. Pin and Stitch the Sides: Lay the fabric for the backrest cover right side up. Pin the two shorter sides together, matching the raw edges. Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
2. Sew the Back Seam: Fold the fabric in half lengthwise, right sides together. Pin the raw edges of the back seam together. Stitch along the pinned line, leaving a 1/2 inch seam allowance.
3. Sewing the Top: Depending on the shape of your backrest, you may need to sew a curved top edge. Use pins to mark the curve and stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
4. Finishing the Edges: Turn the backrest cover right side out. Fold the raw edges of the opening (where you didn’t sew) under by 1/4 inch and then again by 1/4 inch. Press the folded edges flat. Stitch along the folded edge with a straight stitch to create a clean, finished edge.
Attaching the Seat and Backrest Covers
Once you’ve sewn the seat and backrest covers, you need to attach them together. This is typically done by sewing a seam along the top edge of the seat cover and the bottom edge of the backrest cover.
1. Pin the Covers: Lay the seat cover right side up. Place the backrest cover on top of the seat cover, right sides together. Align the top edge of the seat cover with the bottom edge of the backrest cover. Pin the two pieces together along the aligned edge.
2. Stitch the Covers: Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
3. Finishing the Seam: Turn the cover right side out. Fold the raw edges of the seam under by 1/4 inch and then again by 1/4 inch. Press the folded edges flat. Stitch along the folded edge with a straight stitch to create a clean, finished edge.
Sewing the Armrests Covers
Armrest covers are typically sewn in a similar way to the seat and backrest covers. You can use a rectangular piece of fabric or a more complex shape, depending on the style of your chair.
1. Pin and Stitch the Sides: Lay the fabric for the armrest cover right side up. Pin the two shorter sides together, matching the raw edges. Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
2. Sew the Back Seam: Fold the fabric in half lengthwise, right sides together. Pin the raw edges of the back seam together. Stitch along the pinned line, leaving a 1/2 inch seam allowance.
3. Sewing the Top and Bottom: Depending on the shape of your armrest, you may need to sew a curved top and bottom edge. Use pins to mark the curves and stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance.
4. Finishing the Edges: Turn the armrest cover right side out. Fold the raw edges of the opening (where you didn’t sew) under by 1/4 inch and then again by 1/4 inch. Press the folded edges flat. Stitch along the folded edge with a straight stitch to create a clean, finished edge.
Attaching the Armrest Covers
Once you’ve sewn the armrest covers, you need to attach them to the main cover. This can be done in a variety of ways, depending on the style of your chair.
1. Sewing the Armrest Covers to the Seat Cover: If your chair has armrests that are directly attached to the seat, you can sew the armrest covers to the seat cover. Pin the armrest cover to the seat cover, right sides together, aligning the raw edges. Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance. Finish the seam by folding the raw edges under and stitching.
2. Using Velcro or Buttons: If your chair has armrests that are separate from the seat, you can attach the armrest covers using Velcro or buttons. Sew Velcro strips to the bottom of the armrest covers and the top of the seat cover. Alternatively, sew buttonholes to the bottom of the armrest covers and buttons to the top of the seat cover.
Tip: If you’re using Velcro, make sure to choose a high-quality, weather-resistant type.
Sewing the Chair Cover
Once all the pieces are sewn, you’re ready to assemble the entire chair cover. This may involve attaching the seat cover to the backrest cover and then attaching the armrest covers.
1. Pin the Seat and Backrest Covers: Lay the seat cover right side up. Place the backrest cover on top of the seat cover, right sides together. Align the top edge of the seat cover with the bottom edge of the backrest cover. Pin the two pieces together along the aligned edge.
2. Stitch the Seat and Backrest Covers: Stitch along the pinned line with a straight stitch, leaving a 1/2 inch seam allowance. Finish the seam by folding the raw edges under and stitching.
3. Attach the Armrest Covers: Attach the armrest covers to the seat and backrest cover, using the method you chose in the previous step.
Tip: For a more professional finish, you can use a serger to finish all the seams on your chair cover.
How to sew patio chair covers – Sewing patio chair covers is a fun way to refresh your outdoor space! You can even add a touch of personality by using different fabrics and patterns. And don’t forget to protect your floors from scratches with some stylish chair leg foot covers.
These will complement your new chair covers and add a touch of elegance to your patio. Once you’re done, you’ll have a comfy and stylish outdoor seating area that’s sure to impress!
Sewing patio chair covers is a fun and easy way to give your outdoor space a fresh look! If you’re looking for a soft and elegant touch, consider using light pink chair covers. They’ll add a touch of whimsy and charm to your patio, and they’re easy to sew with just a little bit of fabric and some basic sewing skills.
So, grab your sewing machine and get creative!
